2020 Keith Huber LVT - Dominator II

Keith Huber LVT - Dominator II 3000 US GAL - ASME & DOT 412:

STANDARD FEATURES:

-Single compartment code carbon steel tank with 5/16" Shell Material for long life
-20" top manway
-Anti-surge baffles inside waste tank resists surging during starting and stopping
-The Tank is mounted independent of the body and is secured to the body with a 3-point mounting system
-A tank lift powered by a 3 stage double acting hydraulic cylinder mounted to the front head.
-The tank primary shut off system with a 6" stainless steel float ball is located in the front top center of the tank with single isolation valve
-The rear liquid level assembly includes a dual seal bushing with Viton o-ring seal and is replaceable from the outside of the tank
-Hydraulic operated full opening rear door with integrated safety cylinder valve
-Safety Prop Bars; Rear door and tank
-Liquid Cooled 440 CFM Becker Pump
-Power to run the vacuum pump is provided by a PTO driven hydraulic system
-A four way valve provides control of vacuum loading and pressure discharge
-Secondary moisture trap provides added protection for the pump
-Systems Controls Inside a Nema 4 waterproof electrical
-Tandem Axle Body
-Full length open top enclosed fender/hose tray, slick plate
-Rear bumper for valve protection
-18"x18"x30" aluminum storage cabinet bolted on the driver side
-Rear Mounted Grounding Reel
-Back-Up Alarm
-Rear work light, LED running lights
-Rear hose hooks located 2" below centerline of tank
-Dual 4” camlock style muffler for down winding
-Vibrator Pad
-Tank mounted full length walkway
-Tank Vent
-Roper Pump Ready
-Newson Gale Grounding System, intended operation intake valve closure
Double Valves:
-4” Intake Valve angled (NVE Air, Betts Manual) 811-05-1155
-6” Discharge Valve (NVE Air, Betts Manual) 811-05-3287