Aftermarket Used

Information

Keith Huber LVT - Dominator II 3000 US GAL - ASME & DOT 412:

STANDARD FEATURES:

-Tank Capacity of 3,000 Gallons (70 barrels or 15 cubic yards)
-Single compartment tank
-20" top manway
-Anti-surge baffles inside waste tank resists surging during starting and stopping
-The Tank is mounted independent of the body and is secured to the body with a 3-point mounting system
-A tank lift powered by a 3 stage double acting hydraulic cylinder mounted to the front head.
-The tank primary shut off system with a 6" stainless steel float ball is located in the front top center of the tank with single isolation valve
-The rear liquid level assembly includes a dual seal bushing with Viton o-ring seal and is replaceable from the outside of the tank
-Hydraulic operated full opening rear door with integrated safety cylinder valve
-4” Intake valve w/internal standpipe (SS Manual Betts)
-6” Discharge valve (SS Air Betts)
-Safety Prop Bars; Rear door and tank
-Liquid Cooled 440 CFM Becker
-Power to run the vacuum pump is provided by a PTO driven hydraulic system
-A four way valve provides control of vacuum loading and pressure discharge
-Secondary moisture trap provides added protection for the pump
-Systems Controls Inside a Nema 4 waterproof electrical
-Tandem Axle Body
-Full length open top enclosed fender/hose tray
-Rear bumper for valve protection
-18"x18"x30" aluminum storage cabinet bolted on the driver side
-Rear Mounted Grounding Reel
-Back-Up Alarm
-Rear work light, LED running lights
-Rear hose hooks located 2" below centerline of tank
-Dual 4” camlock style muffler for down winding
-Vibrator Pad
-Tank mounted full length walkway
-316L Stainless Steel tank and wetted parts